Table of Contents
Advertisement
User Manual
HDL-MPT4-RF.18
5- Select the module, you will be able to change its ID and remark it. (the Subnet ID must
be same as the gateway's).
6- Click 'Modify Settings of Selection', and it will show 'configurate successful', then all its
wireless parameters will follow the gateway's (Band, Frequency and PSK).
7- Click 'all Node Exit Setup', then the wireless devices will exit the wireless setup mode.
8- Go to the HDL BUS setup tool's main interface to search and add the panel, then can
start to configure it via the gateway.
5.1.2 Indicator Intensity
The brightness of its LED indicators can be adjusted. For this 4 touch buttons panel, does
not have LCD screen, so no need to set the LCD backlight.
5.2 Key Assignation
The panel has 4 touch buttons, below screen shot shows the setting interface of the
buttons.
5
Wireless 4 buttons Touch Panel – User Manual
Advertisement
Table of Contents
