Button Status Light Color Set - HDL -MPT4-RF.18 User Manual

User Manual
HDL-MPT4-RF.18

5.6.2 Button Status Light Color Set

Set the ON/OFF status color for each button.
5.6.3 White balance adjust
For some panels, the displaying LED color has little difference from the one you set, user
can adjust its white color with this function. After adjusted, all colors can be indicated
correctly.
6. Channel Setting
Each power interface has 3 output channels, up to 4 power interfaces can be connected in
parallel, then there are 12 channels in total. The panel will assign the dimmer address1-4
for the connected power interfaces by default. User can control the outputs by 'On/Off'
option to check the power interface's address.
14
Wireless 4 buttons Touch Panel – User Manual