Introduction - Honeywell Sensepoint XCL Installation Manual

1.1 Features
6
Sensepoint XCL is a single-sensor fixed gas detector, which supports
the following interfaces dependent on the model:
Analog output: Sensepoint XCL features current loop output,
supporting signals in the range 0 to 22 mA. Typically this interface
is referred to as 4 to 20 mA.
Digital output: Sensepoint XCL supports Modbus RTU digital
communications.
Relay output: Sensepoint XCL provides two change-over relays for
signaling to external control systems or controlling external
alarming devices, for example audible and visual alarm indicators.
Mobile app: A mobile app is available to commission and maintain the
Sensepoint XCL gas detector.
Sensepoint XCL can be used either indoor or outdoors. If used
outdoors, a sheltered location should be chosen, which is protected
from direct sunlight and rain.
Chapter

Introduction

1