Remove The Memory - Fujitsu K50Y Manual

7
Please confirm the location for installing the memory and the memory
amount and configuration.
Refer to "Memory insertion location" for details on where to install the memory. Refer to "Memory
configuration chart" for details on the capacity and configuration of the memory.
8

Remove the memory.

The memory will slant up slightly when you push out the clips on both sides of the memory right
and left. Grab the memory with both hands on the edges and pull it up slantingly to remove it from
the slot.
Importance Importance
Cautions when removing the memory
Please be careful to not pinch your fingers when pressing the clips on both sides
●
of the memory slot to the outside.
Please be careful because if you press the clips to the outside too forcefully the
●
memory can fly out which can result in damage.
9
Install the memory into the memory slot.
Install the memory first in Slot 1 and then in Slot 2.
Insert the memory with the long side from the edge to the notch cut in the terminal side facing the
bottom and press straight down starting from the front of the memory slot.
Long
Notch
Increasing/replacing the memory
Go to the next page
47