Confirming The Amount Of Memory - Fujitsu K50Y Manual

Confirming the amount of memory

Once the memory is installed, please confirm that the memory that was added is able to be used.
Please always perform this confirmation operation after the cover has been attached.
1
Connecting power to the computer.
Please see "Turning the power on" for information on memory.
When nothing is displayed on the screen
If the memory is not installed correctly nothing may be displayed on the screen when
the power is turned on to the PC.
In this case, press and hold the power button for at least 4 second to turn off the power
to the PC, unplug the power cord then reinstall the memory.
2
Click on (Start)
"System" in that order.
3
Please confirm that the value indicated in the circled area has
increased by the amount of memory you added.
The amount of memory displayed will differ depending on the PC used.
"Control Panel"
(The screen may differ from your device or condition)
"System and Maintenance"
Increasing/replacing the memory
Amount of
memory
51