Fujitsu K50Y Manual page 33

Remove the disc
Disks can be ejected from the PC when the power is turned on.
Note
Please do not put your fingers, etc. into the CD/DVD drive tray when setting or ejecting a disk, etc.
●
This could result in injury.
1
Quit any software that is using the disk.
2
Confirm that the CD access lamp is not lighted and the press the CD/
DVD eject button on the left side of the PC.
The disk tray will with the set CD will pop out a bit.
3
Pull out the tray by hand.
Grab the tray with your hand and pull it out.
4
Remove the disc.
5
Press the tray in by hand until you hear a "click".
32