Page 1
ORIGINAL MADE IN ITALY ISTRUZIONI PER L’USO DELLA SEGATRICE PER EDILIZIA OPERATING INSTRUCTIONS MASONRY SAWS MODE D’EMPLOI SCIE SURTABLE DE CHANTIER BEDIENUNGSANLEITUNG SäGEMASCHINE füR DAS BAUWESEN MANUAL DE INSTRUCCIONES CORTADORA PARA OBRA...
Page 2
Battipav srl Battipav srl DATI TECNICI - TEchNIcAL DATA - DONNéEs TEchNIquEs - TEchNIschE DATEN - DATOs TécNIcOs ART. 300 / 3 hP/ 720x1300x 70760 760 mm. 535 x 535 mm. 110 mm. 65 mm. 200 mm. 60 Kg. 25,4 mm 2,2kW 940 mm.
Page 9
Materialien abrasivos Mod. 70760 - 70761 - 701200 - 701201 230 V ~ 50 Hz 2200 W S6 40% 2800 min-1 MOTOR CLASS f risulta in conformità a is in conformity with the est conforme aux in Übereinstimmung ist...
Page 16
THE MACHINE IS NOT INTENDED fOR USE IN AN PURPOSE Of THIS MANUAL EXPLOSIVE ENVIRONMENT This manual is an integral part of the machine. It was produced by BATTIPAV S.R.L. to provide those authorised to work with the machine with the CAUTION information required for its foreseeable lifespan.
Page 17
Battipav srl Dress properly Check tool for damaged parts • Rubber gloves and non-skid footwear are • Before further use of the tool, check it and the recommended when working outdoors. Wear safety devices for damages and be sure that protective hair covering to contain long hair.
Page 18
YEAR Do not use discs for wood Ø max Ø int. or metal Made by: BATTIPAV SRL Do not use discs for wood Via Cavatorta, 6/1 Z.i. 2 - 48033 - Cotignola (RA) ITALY or metal Machine model M IP Level...
Page 19
Battipav srl RECOMMENDED USE: CUTTING TOOL DIAMOND BLADE WET CUTTING CONTINUOUS CROWN: ceramic, marble, stone, single-fired ceramic LASER/SECTORS: cement, natural stones, granite, abrasive materials TURBO: cement, natural stones, granite, refractory. THE TOOL / MATERIAL TO BE CUT MATCHES ARE PURELY INDICATIVE.
Page 20
Battipav srl INSTALLATION CAUTION TRANSPORT IN ORDER TO fACILITATE THE DYNAMIC MACHINE MOVEMENT IN THE YARD, WE RECOMMEND The DYNAMIC machine can be easily moved by LOWERING IT UNTIL THE LOWERED POSITION. using the transport handles. a) loosen the leg locking pins on the front side,...
Page 21
Battipav srl CONNECTING TO POWER SUPPLY CAUTION CAUTION HOLD THE MACHINE DURING THE LEG LOCKING PHASES. The machine is to be connected to the power supply d) Repeat the operation for the opposite side; by a residual current circuit breaker (RCCB) with the...
Page 22
Battipav srl 6) OVERCURRENT CIRCUIT BREAKER: CAUTION intervenes when there overcurrent, interrupting the machine supply. Its intervention is indicated by the expulsion of the IN CASE Of Ø 250 DIAMOND BLADE ASSEMBLY, manual reset. REPLACE THE SHORT SPRAYER, WHICH IS...
Page 23
Battipav srl CUTTING fOR THICKNESS Of UP TO: LASER MARKER 150 mm Ø 250 mm blade 200 mm Ø 300 mm blade CAUTION By adjusting the position of the cutting head using the locking lever, it is possible to cut materials of a height Standard on DYNAMIC 760S and 1200S.
Page 24
OPERATOR’S EYES AND THE END Of THE LINE. machine stop. RESIDUAL RISK MAINTENANCE During the design phase, BATTIPAV SRL paid CAUTION particular attention to the aspects that may generate risks for the safety and health of operators. In spite of this, there are still some potential risks,...
Page 25
Battipav srl • Tighten the register locking nuts again. DISPOSAL • Place everything back in the machine following the operations described so far in reverse order. In the event of scrapping the entire machine, it must be disposed of in accordance with the methods laid down by current legislation.
Page 26
Battipav srl TROUBLESHOOTING HAVE YOUR TOOL REPAIRED BY A QUALIfIED PERSON This electric tool complies with the relevant safety rules. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable danger to the user.