Network Bullet Camera·Quick Start Guide
5)
Insert the waterproof rubber gasket ⑤ into the waterproof
endcap ④, and secure lock nut ⑥ with the waterproof
endcap ④.
6)
Align the snap on the waterproof endcap ④ with the notch on
the camera's network interface socket ①, and then secure the
waterproof endcap ④ to the camera's network interface
socket ① to finish installation.
Camera
Figure 2-19 Water-proof Accessory Installation
Align the snap and notch.
i. Insert
ii. Secure
34
into
.
⑤
④
with
.
⑥
④
Switch/Router