HIKVISION 26 series Quick Start Manual page 28

Network Bullet Camera·Quick Start Guide
Tilt Adjustment
Steps:
Loosen the lock screw 2.
1).
Adjust the tilting position of the camera. The adjusting range is
2).
from 0° to 100°.
Tighten the lock screw 2.
3).
Rotation Adjustment
Steps:
Loosen the lock screw 3.
1).
Rotate the rotation position to adjust the azimuth angle of the
2).
image. The adjusting range is from 0° to 360°.
Tighten the lock screw 3.
3).
Panning
0° to 360°
Lock Screw 1
1
Lock Screw 2
2
Lock Screw 3
3
7. For details about adjusting zoom and focus, refer to Section 2.4.
8. (Optional) Install the water-proof jacket for network interface.
Refer to Section 2.5 for detailed installation procedures.
1
2
0° to 100°
Tilting
Figure 2-13 View Angle Adjustment
3
27
Rotation
0° to 360°