Advertisement
TRAINING
LEISTER Process Technologies and their authorised Service Centres offer free
welding courses and training.
ACCESSORIES
• Only LEISTER accessories should be used.
MAINTENANCE
• Check mains cable (1) and plug for electrical and mechanical damage.
• Clean hot wedge (8) with a copper brush.
• Clean drive and pressure rollers (20/21) with a wire brush.
• Treat chain (22) with a suitable spray as required (chain guard 23/24).
• Check whether rollers (13/14/17/18/19) are running smoothly.
SERVICE AND REPAIR
• The tool should be checked by an authorized Service Center if the following
message appears on the display (5): «maintenance; servicing».
• Repairs have to be carried out by authorised LEISTER Service Centres only. They
guarantee a specialized and reliable repair service within 24 hours using
original LEISTER spare parts.
GUARANTEE AND LIABILITY
• Guarantee and liability are in accordance with the guarantee certificate as
well as with the currently valid general business and sales conditions.
• LEISTER Process Technologies rejects any guarantee claims for tools which are
not in their original condition. The tools must never be altered or changed.
Technical data and specifications are subject to change without prior notice.
Your authorized Service Centre is:
LEISTER SALES & SERVICE CENTER CHINA , 20H Building No.1 515 Yishan Road ,Shanghai, PRC
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen / Switzerland
Tel. +86 021 34141786 Fax. +86 021 64360767
Tel. + 41 41 662 74 74
http://www.plasticwelding.cn
®
Fax + 41 41 662 74 16
E-mail: leister@plasticwelding.cn
www.leister.com
BA Astro/05.2002/GB
sales@leister.com
Advertisement
