Epson Stylus SCAN 2000 Service Manual page 101

EPSON Stylus Scan 2000
4.2.4.1 Removing the glass surface
1. Open the scanner cover.
2. Push out the two hooks securing the glass surface and carefully remove the glass.
Push out these two hooks.
3. Carefully lift up the glass to remove it.
Disassembly & Assembly
4.2.4.2 Removing the lamp
1. Remove the scanner as described in "Removing the Scanner Mechanism" on page 99.
2. Open the scanner unit and pull the cables free from the slot on the right side.
3. Fully open the scanner cover and remove the right and left cover projections. Then
remove two black screws (CBP 3x6) from the document path..
Remove the cover
and two screws.
4. Lift up the document guide as shown below, and remove it.
Disassembly Procedures
Revision A
Pull out these
cables from
the notch
here.
100