Pairing With Your Device - Brookstone 322348 User Manual

PAIRING WITH YOUR DEVICE

1. Prepare your device (e.g., smartphone) to pair using
Bluetooth ® , making sure that the device is within 33 feet
of the earbuds. Refer to your device's owner's manual for
information on using the Bluetooth
2. Press and hold the earbud's Multi-Function Button (MFB)
for about 3 seconds, until the LED Indicator on the band
alternates between red and blue.
3. On your device, search the list of available devices and
select Animal Headband. Note that it may take a few
seconds for the earbuds to be listed as an available device.
Depending on your device, you may have to tap SCAN to
update the device list. Consult your device's owner's manual.
4. If prompted, type the password or PIN 0000.
A message will display on your device confirming that your
device is now paired/connected and the band's LED Indicator
will slowly flash blue, indicating that the device is paired.
The devices will remain paired, even after being turned off, until
you cancel the pairing. Consult your device's owner's manual for
information on cancelling pairing.
If the pairing is not successful within 5 minutes, the Cat
Earbuds will power off. Ensure that both devices are charged,
that the earbuds are in pairing mode and are within 3 feet
of your device, and that there are not objects, such as a wall,
blocking the connection.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth
®
SIG, Inc. and any use of such marks by Brookstone is under license.
6
function.
®
PAIRING WITH MULTIPLE DEVICES
To pair your Cat Earbuds with multiple devices:
1. Pair with the first device as described on Page 6.
2. Press and hold the Multi-Function Button (MFB) for 3
seconds to place the earbuds into pairing mode.
3. Pair with the second device, following the steps on Page 6.
4. Press and hold the MFB to turn off the Cat Earbuds. When
you next power on the Cat Earbuds they will automatically
connect to both paired devices.
7