Charging The Cat Ear Headphones; Pairing Your Device - Brookstone Wireless Cat Ear Headphones Manual

CHARGING THE CAT EAR HEADPHONES

1. Use the included MICRO USB CHARGING CABLE to charge the headphones
with a USB adapter (5V, 1A or above) (not included). The headphones will be
fully charged in approximately 3 hours.
2. The CHARGING LED INDICATOR is red while the headphones are charging
and turns off when the headphones are fully charged.
3. When the headphones' battery is low, the CHARGING LED INDICATOR
will flash red when the headphones are not in Bluetooth
red and blue when the headphones are in Bluetooth
8
® mode and will flash
® mode.

PAIRING YOUR DEVICE

1. P repare your device to pair using Bluetooth
sure you are within 33 feet of the headphones. Refer to your device's owner's
manual for details if necessary.
2. Press and hold the BLUETOOTH BUTTON until the PAIRING LED
INDICATOR illuminates and four tones sound to turn Bluetooth
3. The PAIRING LED INDICATOR will be solid blue for 5 seconds as the
headphones search for previously paired devices. If no connection is made
within 5 seconds, the headphones will enter Bluetooth
PAIRING LED INDICATOR will flash blue and two tones will sound.
4. Once the headphones are in pairing mode and your device is ready to pair, select
"Cat Headphones" on your device. If prompted, use 0000 as a PIN for the pairing
code. Once "Cat Headphones" is selected, the PAIRING LED INDICATOR will
change to solid blue and one tone will sound to confirm pairing is complete.
Notes:
• After the initial pairing of your device, the headphones should
automatically pair with your device the next time the unit is put into
Bluetooth mode. Depending upon your device, you may have to select
®
"Cat Headphones" in your device's Bluetooth
• To cancel pairing mode, press the BLUETOOTH BUTTON to turn off
Bluetooth mode or wait 5 minutes for the headphones to cancel pairing
®
mode and turn off Bluetooth mode automatically. The PAIRING LED
®
INDICATOR will turn off.
• If the ear cups and speaker lights are on, they will turn off if pairing mode
is cancelled automatically. Press the LIGHTS ON/OFF/CHOOSE
COLOR BUTTON to turn the ear cups and speaker lights on.
wireless technology, making
®
® mode on.
® pairing mode. The
menu.
®
9