Charging The Headphones; Transmitter Set Up; Using With Transmitter/Direct Plug; Troubleshooting - Brookstone Wireless TV Headphones Start Manual

CHARGING THE HEADPHONES

TRANSMITTER SET UP

1. Carefully remove the Left Ear Pad 1. Plug the AC/DC power adapter
and insert 2 AAA rechargeable
into the DC jack located on the
batteries (included) according to
rear of the transmitter. Plug the
the polarity markings. Replace the
other end of the AC/DC power
ear pad.
adapter into an electrical wall
outlet.
2. Slide the power switch to ON. The
transmitter LED will flash AMBER
for several seconds and then will
be solid AMBER.
3. Connect the transmitter to an
audio source using the included
RCA cables.
2. For first time use, charge the
4. If the audio source is a TV, DVD,
headphones for at least 7 hours.
VCD, VCR, or Hi-Fi, set the
To charge headphones, ensure the
attenuation to -8dB for the
headphones are OFF by pressing
recommended signal strength.
the Power button on the Right Ear
If the audio source is a CD
Pad until the Power LED turns
or MP3 player, phone, or tablet,
off. Place the headphones on the
set the attenuation to 0dB for the
top of transmitter ensuring the
recommended signal strength.
charging contacts are aligned.
The transmitter LED is PURPLE
5. When the transmitter receives an
to show the headphones are
audio signal, the transmitter LED is
charging. When the headphones
solid AMBER. After 5 minutes
are fully charged the transmitter
of no audio signal detected, the
LED is BLUE. transmitter LED is solid BLUE.
Note: When headphones have LOW
BATTERY, the Power LED will flash
RED and a beep will sound. The
beep will sound every minute until
the headphones shut down due to
the exhausted battery.
USING THE HEADPHONES USING THE HEADPHONES
WITH THE TRANSMITTER WITH THE DIRECT PLUG
1. Connect the headphones directly
1. To turn the headphones ON, press
to an audio source by plugging
and hold the Power button on the
Right Ear Pad until the Power LED one end of a 3.5mm-to-3.5mm
is RED. cable (not included) into the port
on the Right Ear Pad and the
2. The headphones will
other end into the audio source.
automatically sync to the
2. Use the volume controls on
transmitter. When the
headphones and transmitter are the audio source to change the
synced, the Power LED is volume.
GREEN.
Note: When using a 3.5mm-to-
3.5mm cable, the Power LED is OFF.
3. Use the volume controls on the
Right Ear Pad and the audio
source to change the volume. A
beep will sound when pressing
the Volume + button when the
maximum volume is reached.
4. After 5 minutes of no audio
signal detected, the Power LED
is solid RED.
5. To turn the headphones OFF,
press and hold the power
button until the Power LED is
OFF.
Note: If there is interference or poor
signal reception, audio from the
headphones will mute and the Power
LED will change to RED while the
headphones and transmitter search
for another channel.

TROUBLESHOOTING

CARE AND STORAGE
NO SOUND
1. Dust the headphones and
transmitter with a soft,
• Ensure the AC/DC adaptor is
dry cloth.
securely plugged into the
2. Store the headphones and
transmitter.
transmitter in a cool, dry place.
• Ensure the headphones are
powered On.

SPECIFICATIONS

• Ensure the headphones and the
Power Supply (Transmitter): DC 5V,
transmitter are synced.
550mA
• The headphones may need to be
Power Supply (Headphones): 2 x AAA
charged.
rechargeable NiMH batteries
• The headphones may need to move
Frequency: 2.4 GHz Digital
closer to the transmitter.
Transmission mode: UHF Stereo
• Ensure the audio device is
Range: Up to 100 ft (approx. 30 m)
switched ON.
S/N Radio: 75 dB
• The volume of the audio device
may need to be increased.
Frequency Response: 30Hz~20KHz
Charging Time: Approx. 3 hours
(subsequent uses after first initial
charge of 7 hours)
Battery Life: Approx. 10 hours
ONE (1) YEAR LIMITED WARRANTY warranties to the purchaser, but Brookstone,
in so far as permitted by law, provides these
Brookstone ® warrants this product against
products "as is." This warranty does not apply to:
defects in materials and/or workmanship under
a) damage caused by failure to follow instructions
normal use for a period of ONE (1) YEAR from
relating to product' s use or the installation of
the date of purchase by the original purchaser
components; b) damage caused by accident,
("Warranty Period"). If a defect arises and a
abuse, misuse, fire, floods, earthquake or other
valid claim is received within the Warranty
external causes; c) damage caused by service
Period, at its option, Brookstone will either
performed by anyone who is not a representative
1) repair the defect at no charge, using
of Brookstone; d) accessories used in conjunction
new or refurbished replacement parts, or
with a covered product; e) a product or part
2) replace the product with a new product that
that has been modified to alter functionality or
is at least functionally equivalent to the original
capability; f) items intended to be periodically
product, or 3) provide a store credit in the
replaced by the purchaser during the normal
amount of the purchase price of the original
life of the product including, without limitation,
product. A replacement product or part, including
batteries or light bulbs; g) any product sold
a user-installable part installed in accordance with
"as is" including, without limitation, floor
instructions provided by Brookstone, assumes
demonstration models and refurbished items;
the remaining warranty of the original product.
or h) a product that is used commercially or for a
When a product or part is exchanged, any
commercial purpose.
replacement item becomes your property and the
BROOKSTONE SHALL NOT BE LIABLE
replaced item becomes Brookstone' s property.
When a store credit is given, the original product FOR INCIDENTAL OR CONSEQUENTIAL
must be returned to Brookstone and becomes DAMAGES RESULTING FROM THE USE
Brookstone' s property. OF THIS PRODUCT, OR ARISING OUT OF
ANY BREACH OF THIS WARRANTY. TO THE
Obtaining Service: To obtain warranty service,
EXTENT PERMITTED BY APPLICABLE LAW,
call Brookstone Limited Warranty Service at
BROOKSTONE DISCLAIMS ANY AND ALL
1-800-292-9819. Please be prepared to
STATUTORY OR IMPLIED WARRANTIES,
describe the product that needs service and
INCLUDING, WITHOUT
the nature of the problem. A purchase receipt
WARRANTIES OF MERCHANTABILITY,
is required. All repairs and replacements must
FITNESS FOR A PARTICULAR PURPOSE
be authorized in advance. Service options, parts
AND WARRANTIES AGAINST
availability and response times will vary. You are
OR LATENT DEFECTS. IF BROOKSTONE
responsible for delivery and the cost of delivery of
CANNOT LAWFULLY DISCLAIM STATUTORY
the product or any parts to the authorized service
OR IMPLIED WARRANTIES, THEN TO THE
center for replacement, per our instructions.
EXTENT PERMITTED BY LAW, ALL SUCH
Limits and Exclusions: Coverage under this WARRANTIES SHALL BE
Limited Warranty is limited to the United States of DURATION TO THE DURATION OF THIS
America, including the District of Columbia and the
EXPRESS WARRANTY.
U.S. Territories of Guam, Puerto Rico, and the U.S.
Some states disallow the exclusion or limitation of
Virgin Islands. This Limited Warranty applies only
incidental or consequential damages or how long
to products manufactured for Brookstone that can
an implied warranty lasts, so the above exclusions
be identified by the "Brookstone" trademark, trade
or limitations may not apply to you. This warranty
name, or logo affixed to them or their packaging.
gives you specific legal rights and you may also
The Limited Warranty does not apply to any non-
have other rights, which vary from state to state.
Brookstone products. Manufacturers or suppliers
other than Brookstone may provide their own
LIMITATION,
HIDDEN
LIMITED IN