Powering Off And On; Pairing - Brookstone Wireless TV Headphones User Manual

POWErINg Off aNd ON

1 . To power the transmitter off, press and hold the POWER button for 5 seconds
(the power LED will go off) .
Note: depending upon your audio setup, you may have to unplug the cable
to your TV, computer, etc. to restore normal speaker operation.
2 . To power the transmitter on, press and release the POWER button .

PaIRInG

You will need to pair the HEADPHONES and the TRANSMITTER the first time
you use them with an audio source .
1 . Connect the TRANSMITTER to a power source . The TRANSMITTER's power
LED will illuminate .
2 . Push in and hold the CONNECT button on both the HEADPHONES and the
TRANSMITTER . The CONNECT button LED on the TRANSMITTER will blink
fast while pairing . When a beep is heard, release the buttons . The pairing is
finalized when a long beep is heard .
3 . Now connect the TRANSMITTER to an audio source and play an audio track .
Both the CONNECT button on the TRANSMITTER and the POWER button
on the HEADPHONES will illuminate solid .
4 . When listening to this same audio source again, the HEADPHONES will
automatically pair with the TRANSMITTER connected to that audio source .
Note: The TraNSmITTEr will pair with only one set of .
HEADPHONES
10