Process Placement - Cisco NCS 6000 Series Configuration Manual

Process Placement

This module describes conceptual information and configuration tasks for process placement on your router.
Process Placement on Cisco IOS XR software balances application processes between the available based
on memory usage and other criteria. Use the procedures described in this document to reoptimize the placement
of processes, or override the default placement policies.
For complete descriptions of the process placement commands listed in this module, see
on page
Table 3: Feature History for Configuring Cisco IOS XR Process Placement
Release
Release 5.0.0
This module contains the following topics:
•
•
•
•
•
Prerequisites for Configuring Cisco IOS XR Process Placement
Only processes that are identified in Cisco IOS XR software as placeable can be controlled through process
Note
placement configuration. Nonplaceable processes are not affected by placement policy. To learn the
processes that are placeable, issue the show placement program all command.
21. .
Prerequisites for Configuring Cisco IOS XR Process Placement , page 7
Information About Cisco IOS XR Process Placement, page 8
How to Configure Cisco IOS XR Process Placement, page 11
Configuration Examples for Process Placement, page 19
Additional References, page 20
System Management Configuration Guide for the Cisco NCS 6000 Series Router, Release 5.0.x
2
C H A P T E R
Modification
This feature was introduced.
Related Documents,
7