Table of Contents
Advertisement
Configuring Bulk Statistics Transfer Options
What to Do Next
Configure the bulk statistics transfer options.
Configuring Bulk Statistics Transfer Options
The final step in configuring periodic MIB data collection and transfer is to configure the transfer options.
The collected MIB data are kept in a local file-like entity called a VFile (virtual file, referred to as a bulk
statistics file in this document). This file can be transferred to a remote network management station at intervals
you specify.
Before You Begin
The bulk statistics object lists and bulk statistics schemas must be defined before configuring the bulk statistics
transfer options.
SUMMARY STEPS
1. configure
2. snmp-server mib bulkstat transfer-id transfer-id
3. buffer-size bytes
4. format {bulkBinary | bulkASCII | schemaASCII}
5. schema schema-name
6. transfer-interval minutes
7. url primary url
8. url secondary url
9. retry number
10. retain minutes
11. enable
12. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
snmp-server mib bulkstat transfer-id
transfer-id
Example:
RP/0/RP0/CPU0:router(config)# snmp-server
mib
bulkstat transfer bulkstat1
System Management Configuration Guide for the Cisco NCS 6000 Series Router, Release 5.0.x
92
Configuring Periodic MIB Data Collection and Transfer
Purpose
Identifies the transfer configuration with a name (transfer-id argument)
and enters bulk statistics transfer configuration mode.
Advertisement
Table of Contents
