Configure Timers - DPS Telecom SCM G2 User Manual

11

6.3.2 Configure Timers

6.3.2.1 RTS Head Time
Fig. 6.7. Press H in the C)onfig > S)ettings menu to configure RTS Head time
The C)onfig > S)ettings > H)ead command opens options for setting the RTS Head time (how long the Site
Controller SCM carrier is on before transmitting data). The default value time is 30 msec (milliseconds). RTS
head time range is 0-255 msec.
6.3.2.2 RTS Tail Time
Fig. 6.8. Press T in the C)onfig > S)ettings menu to configure RTS Tail time
The C)onfig > S)ettings > T)ail command opens options for setting the RTS tail time (how long the carrier is on
after transmitting data). The default value time is 10 msec. RTS tail time range is 0-255 msec.
6.3.2.3 Character Wait Time
Fig. 6.9. Press C in the C)onfig > S)ettings menu to configure Character Wait Time
The C)onfig > S)ettings > C)har (Character Wait Time) command sets the character timeout timer. The character