Inter-m NPX-8000 Operation Manual page 14

AudIo MAtrIx Controller
2.2 VOLUME CONTROL
After moving the VoluMe Control menu, you can adjust the device's volume by pressing the
SeleCt/enter switch.
① When turning the Selet/enter switch on the volume setting screen, you can change the module to
adjust the volume.
② When SeleCt/enter switch is pressed on Module A, the screen displays the selectable input channels.
If the SeleCt/enter switch is turned on, the channel can be changed and the channel is selected by
pressing the SeleCt/enter switch.
③ Select a input channel to control volume, then turn the SeleCt/enter switch on to adjust volume of the
channel. After adjust the volume, press the switch to return to the screen where you can select the input
channel.
④ When SeleCt/enter switch is pressed on Module B, the screen displays the selectable output
channels. If the SeleCt/enter switch is turned on, the channel can be changed and the channel is
selected by pressing the SeleCt/enter switch.
⑤ Select a output channel to control volume, then turn SeleCt/enter switch on to adjust volume of the
channel. After adjust volume, press the switch to return to the screen where you can select the output
channel.
⑥ Press eSC button to return to previous screen.
12 nPx-8000