Inter-m NPX-8000 Operation Manual page 11

<rJ 45 Pin description>
no description
1 CAn H
2 CAn l
3 n.C
4 dC 40V
5 Gnd
※ use only direct cable to link with each devices.
※ It is recommended CAt 5e dCr with less than 9.8Ω/100m.
② lM Port
- It is the port for link with nlM-8000C and nlM-8000A. It can be connected with nlM-8000C up to 8
devices and a nlM-8000A by daisy chain connectivity.
RM
LM LINK LM LINK
LM LINK LM LINK
NLM-8000C (MAX 8EA)
Daisy chain is a wiring scheme in which
multiple devices are wired together in sequence.
※ use only direct cable to link with each devices.
※ It is recommended CAt 5e dCr with less than 9.8Ω/100m.
③ etHernet Port
- It is for control nPx-8000 with ethernet network. You can control nPx-8000 by MP-8000 PC program.
※ refer to MP-8000's manual for setting.
6 n.C
7 Audio out+
8 Audio out-
MR-8000
ETHERNET
LM
LM LINK LM LINK LINK IN
LM LINK LM LINK LINK OUT
NLM-8000A
AudIo MAtrIx Controller
<rJ 45 Pin description>
nPx-8000 9