Table of Contents
Advertisement
Chapter 4
Major Cleaning
9. Using a Toraysee cloth (listed on page 68), wipe off the dirt on
the discharge LED.
10. Install the discharge LED.
Cleaning The Photoreceptor Drum
CAUTION
When cleaning the photoreceptor drum, observe the following
precautions:
•
•
•
1. Remove the photoreceptor drum from the printer. (See page
115.)
2. Place the drum on a covered work surface.
98
1
Legend:
1)
Discharge LED
Do not touch the drum surface with your hands.
To prevent the drum surface from being scratched,
clean it in a location free of dust.
Cleaning the drum may result in wiping stains. A drum
left unused in the printer for a long time after cleaning
may especially be affected. Therefore, after cleaning
and installing the drum in the printer, use maximum
size paper to print an image repeatedly until no stains
remain. Stains usually clear after printing a few dozen
pages.
Advertisement
Table of Contents
