Table of Contents
Advertisement
In most cases, Mode refers to the emulation that you will use. The Printronix
LinePrinter Plus emulation is the standard emulation mode. IGP/PGL, IGP/VGL,
CTHI, IPDS, or PCL5 Language Compatible emulations are available as options.
The contents of the Mode menu structure will be created by the printer at
run–time when the printer software reads the diskette to determine what
interpreter(s) is available.
When powered–up, the printer will automatically load the default configuration
values. The default set of parameters is the factory setting until a new setting is
saved to default. Refer to the "Factory Settings" section on page 3–14 to restore
the factory settings after you have created a new default setting.
NOTE: Each emulation may have its own set of configuration options in
Impact Printer Emulation
The printer comes equipped with the Printronix LinePrinter Plus Emulation
software. Refer to the Impact Printer Emulation User's Manual for details,
including configuration parameter definitions.
PCL5
The Printronix PCL 5 emulation is a software application that emulates the
features and functionality of Hewlett-Packard's PCL 5 printer language. Refer to
the Phoenix Page PCL5 Emulation Operator's Guide for details, including
configuration parameter definitions.
IGP/PGL
IGP/PGL is the Intelligent Graphics Printing software for the Printronix Graphics
Language, which is designed for the new Printronix PSA line of impact and
non–impact printers. The IGP/PGL provides on–line forms, bar codes, and many
alphanumeric text–generation capabilities and is compatible with earlier versions
of Printronix IGP protocol and programming. Refer to the IGP/PGL Printronix
Graphics Language User's Manual for details, including configuration parameter
definitions.
Configuring the Printer
addition to those that are in the printer system list. Refer to the
appropriate Programmer's Reference Manual or Operator's Guide
for these unique configuration settings.
3–27
Advertisement
Table of Contents
