Maximum Character Memory; Maximum Cache Memory - Printronix L1024 Setup Manual

Maximum Character Memory

This option is used to specify the size of the largest character that can be printed.
To calculate the memory requirement, use this equation:
horizontal
resolution
For example, if an application requires a character that is 7 inches high by 4
inches wide, calculate the Maximum Character Memory value as follows:
Therefore, select a value that is equal to or greater than 315,000. The closest
available value is 350 KBytes.
The allowable range is 50 KBytes to 900 KBytes, in 50–KByte increments. The
default value for this parameter is 300 KBytes.

Maximum Cache Memory

This option is used to specify the maximum block of memory that can be
allocated to the font cache. The font cache stores bitmaps that are created on
demand from the font outlines stored on the printer diskette. The cache allows
the printer to print scalable fonts at optimum speed.
To calculate the memory requirement, use this equation:
horizontal
resolution x
The allowable range is 50 KBytes to 900 KBytes, in 50–KByte increments. The
default value for this parameter is 200 KBytes.
Configuring the Printer
vertical
x x
resolution
300 x 300
8
average character
vertical
x
height (inches)
resolution
character
height (inches)
8
x 7 x 4
= 315,000
average character
x
width (inches)
8
character
x
width (inches)
# of characters
x
to be cached
3–45