Dell PowerVault MD3600f Hardware Installation And Troubleshooting Manual page 52

To create a virtual disk, use one of the following methods:
• Automatic configuration
• Manual configuration
Create disk groups using automatic configuration as follows:
1 To start the Create Disk Group Wizard, perform one of these actions:
• To create a disk group from unconfigured capacity in the storage
array—On the Logical tab, select Unconfigured Capacity node
Disk Group Create.
Alternatively, you can right-click the Unconfigured Capacity node
and select Create Disk Group from the pop-up menu.
• To create a disk group from unassigned physical disks in the storage
array—On the Physical tab, select one or more unassigned physical
disks of the same physical disk type, and select Disk Group Create.
Alternatively, you can right-click the unassigned physical disks, and
select Create Disk Group from the pop-up menu.
• To create a secure disk group—On the Physical tab, select one or more
unassigned security capable physical disks of the same physical disk
type, and select Disk Group Create.
Alternatively, you can right-click the unassigned security capable
physical disks, and select Create Disk Group from the pop-up menu.
The Create Disk Group window is displayed.
2 Click Next. The Disk Group Name and Physical Disk Selection window is
displayed.
3 Type a name (up to 30 characters) for the disk group in Disk Group Name
field.
4 Select the appropriate configuration method of Physical Disk selection
from the following:
• Automatic (see step 6)
• Manual (see step 7)
5 Click Next.
6 For automatic configuration, the RAID Level and Capacity window is
displayed.
52
Preparing Your Systems for Clustering