Install a cable from cluster node 1 HBA port 1 to the Fibre Channel
b
port on the MD36x0f RAID controller module 1, port In-0.
2 Connect cluster node 2 to the storage system:
Install a cable from cluster node 2 HBA port 0 to the Fibre Channel
a
port on the MD36x0f RAID controller module 0, port In-1.
Install a cable from cluster node 2 HBA port 1 to the Fibre Channel
b
port on the MD36x0f RAID controller module 1, port In-1.
3 Connect cluster node 3 to the storage system:
Install a cable from cluster node 3 HBA port 0 to the Fibre Channel
a
port on the MD36x0f RAID controller module 0, port In-2.
Install a cable from cluster node 3 HBA port 1 to the Fibre Channel
b
port on the MD36x0f RAID controller module 1, port In-2.
4 Connect cluster node 4 to the storage system:
Install a cable from cluster node 4 HBA port 0 to the Fibre Channel
a
port on the MD36x0f RAID controller module 0, port In-3.
Install a cable from cluster node 4 HBA port 1 to the Fibre Channel
b
port on the MD36x0f RAID controller module 1, port In-3.
28
Cabling Your Cluster Hardware