Dell PowerVault MD3600f Hardware Installation And Troubleshooting Manual page 29

Figure 2-5 shows a four-cluster node connected to two RAID controller
modules. Since each cluster node has redundant paths, loss of a single path
still allows access to the storage array through the alternate path.
Figure 2-5. Cabling a Four-Node Direct-Attached Cluster to a PowerVault MD36
Storage System
PowerVault MD360x0f series storage array
Cabling Multiple Clusters to an MD36
The high number of available Fibre Channel ports on the MD36x0f storage
system also allows you to configure four-node clusters, 2 two-node clusters or
a mix of cluster(s) and non-clustered server(s) in a direct-attached
configuration.
Corporate, public, or
private network
x
0f Storage System
Cabling Your Cluster Hardware
x
0f
29