7. Remove the memory module by doing the following:
a. Open the film and keep it fully open
b. Open the latches on both sides of the memory slot at the same time
c. Remove the memory module
8. Install a new memory module by doing the following:
Note: If you install only one memory module, install it into the slot on the top.
a. Open the film and keep it fully open
b. Insert the new memory module into the memory slot at an angle of about 20 degrees
c. Pivot the memory module downward until it snaps into place
firmly installed in the memory slot and cannot be moved easily.
1
.
3
.
1
.
2
.
3
. Ensure that the memory module is
.
Chapter 10
Replacing devices
2
.
119