ReSound FM02 Compatibility Manual page 5

Fm receiver solutions

Enlarged version

Connect universal FM receiver to a

FM transmitter

Connecting ReSound hearing instrument(s) to a FM transmitter using a

universal FM receiver via a DAI adaptor

• Connect the DAI to the hearing instrument.

• Connect the universal FM receiver to the DAI shoe.

• The hearing instruments will automatically switch to the FM program

ReSound Up Smart BTE and Super Power models with LED will blink

for FM confirmation.

• Turn on the transmitter (The screen should light up).

• Make sure the transmitter is charged.

• Connect the FM receiver with the transmitter; place hearing instrument(s)

with the FM receiver connected within 10-35cm (4-20 inches) of the

transmitter.

• Briefly press the Connect key on the transmitter.

• Verify that the sound is being transmitted by tapping the transmitter

microphone sound should be audible in the hearing instrument(s).

• For further details on how to connect refer to your guide provided for the

FM system you are using.

Transmitter compatibility

FM02 compatibility

Phonak transmitters

Phonak inspiro

Phonak SmartLink

Phonak ZoomLink

Phonak EasyLink

FM02 compatibility

Oticon transmitters

Oticon Amigo T20/21

Oticon Amigo T30/31

Except for the EO-98 models. For these, manually switch to the FM program.

Universal receiver compatibility

Phonak universal receiver compatibility via DAI

Phonak Roger

Phonak MLxi

Phonak MicroMLxS

Oticon universal receiver compatibility via DAI

Amigo R2