Connecting With Cable Box - Daewoo DV6T812N Owner's Manual

DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 13

Connecting with Cable Box

You should install a distributor additionally.
How to connect
Converter Box
IN
OUT
A/B Switch
RF CABLE
RF CABLE
the IN terminal on the converter box.
Connect another RF cable between the other OUT terminal on the splitter and the A-IN terminal on an A/B switch
(available at your local electronics store.) Connect a third RF cable between the OUT terminal on the converter box
and the B-IN terminal on the A/B switch.
Connect a RF cable between the OUT terminal on the A/B switch and the ANT. IN on your DVD-VIDEO.
When the A/B switch is in the B position, use the converter box to change channels ; when the A/B switch is in the A
position, use the DVD-VIDEO to change channels.
How to watch general broadcasting with recording CATV
1
1
Set Channel Select switch of Converter Box to CH 3 or 4 as same as video exclusive channel. Press [SET] button in
[VCR] operation to set video exclusive channel in "CHANNEL SET" screen.
2
2
Press channel button of Converter Box to select channel to be recorded. In this case, if you want to watch CATV to
be recorded, press [TV/INPUT] button of TV to select "Out(VCR)".
3
3
Press [REC] button in DVD-Video.
4
4
To watch general broadcasting, press channel button in TV to select the desired channel.
• For some types of TV, you should press [TV/INPUT] button in TV REMOTE and convert from Out 1( VCR 1) or Out 2(VCR
2) mode to Broadcasting Channel mode to change TV channel.
• Change channel selection of CATV receiver in recording, contents of recording is changed.
Rear Panel of DVD-VIDEO
ANT.IN
OUT IN
R
AUDIO
L
RF OUT
VIDEO
RF CABLE
SPLITTER (Not supported)
OUT
IN
OUT
Rear Panel of TV
INPUT 1 INPUT 2
ANT IN
AUDIO/VIDEO CABLE
If your cable system only
requires you to use a converter
box for some channels
(i.e., pay-TV channels), follow these
steps: Find the primary incoming RF
cable. Plug this cable into a splitter
(available at your local electronics
store.) Connect one RF cable between
Cable Antenna
one OUT terminal on the splitter and
13