Daewoo DV6T812N Owner's Manual page 57

DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 56
What is a record tab of a videotape?
• The tab on a videotape enables a user to record and prevents the
recorded area from rerecording.
• To record it, a user should use a videotape with a tab.
• If a user input a videotape without a tab to record, the videotape is
ejected automatically.
• In order to avoid a recorded area to be rerecorded, a tab should be
removed.
• To rerecord a recorded videotape, please scotch-tape on the removed
tab position.
Noise
• Noise means poor screen conditions of VCR such as interruption or
trembles in the top of bottom of a screen.
• If a noise occurs, please adjust a screen by operating "TRACKING"
buttons .
• Adjustment may not improve quality screen if the tape is originally
recorded mixed with some noise or kept in poor conditions.
• If some noise remains after adjusting it, VCR heads may be
contaminated or worn.
• In case VCR heads are contaminated, please rub them cleanly.
Auto-detect the contamination of VCR heads
• If the product, which has a auto-detector, detects a contaminated head(s), it shows the conditions to notice the
contamination on screen.
* In case of the notice on screen, please rub the heads with a head-cleaner followed by "How to use a head-
cleaner".
How to use a head cleaner
• In case of a old or contaminated videotape, screen may not be clean from the contamination of VCR heads. Please
remove contaminants using a head-cleaner like below order.
1 Insert a head-cleaner into VCR
2 Press "PLAY" for 5 seconds, and then press "FF" for about 10 seconds.
3 Eject a head-cleaner from VCR
• If the screen is not clean yet, please repeat the above 2 or 3 times more.
• A head-cleaner is not for sale. Please ask it for the nearest agent.
• In case a user ask the removal of contaminants of us, the user should pay extra charges.
56
PLAY (5secs)
Basic information about VCR and Videotape
safety tab
FF (10secs)