Daewoo DV6T812N Owner's Manual page 36

DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 35
Marking a tape for zero search
Display (O.S.D)
Daylight-Saving Time
1
1
Use PLAY, REW,or FF to reach the point on the tape that you would like to mark as
0:00:00.
2
2
Press [DISPLAY] button to display the tape counter on the screen.
3
3
Press [CLEAR] button to reset the tape counter to 0:00:00.
4
4
You can continue to play the tape or perform other functions with the VCR.
1
1
Press [DISPLAY] button to display the tape counter, clock and status mode on the TV
screen..
2
2
And, by one more pressing [DISPLAY] button before disappearing the OSD from the
screen, only the tape counter will remain on the screen.
Press [SETUP] button and select "CLOCK SET".
1
1
Move into "Auto DST" with [
Press [ENTER] to switch between ON
2
2
and OFF.
- Select ON if you want the VCR's clock to
automatically adjust for daylight-saving time.
- Select OFF if you do not want the VCR's
clock to adjust for daylight-saving time.
SPRING Forward ; Fall Backward
In the Spring, daylight-saving time begins on the first Sunday in April. Because the clock
automatically changes from 2:00 AM to 3:00 AM (forward one hour), remember to include the extra
hour for timer recording falling within this time frame.
In the Autumn, daylight-saving time ends on the last Sunday in October.
The VCR clock automatically changes from 2:00 AM to 1:00 AM (back one hour). Therefore, it can
affect your recording length.
Using advanced features
] .
CLOCK SET
Time and Date Set
Auto DST : ON
Move:
End:
SETUP
Select: ENTER
35