Connecting With Tv - Daewoo DV6T812N Owner's Manual

DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 12

Connecting with TV

In the initial SET, exclusive channel for video is set to CH 3. To change this setting, set again in "CHANNEL SET"
screen in VCR operation.
In connecting RF cable to TV, set TV channel to CH3.
How to Connect with RF cable, Audio/Video jack
Outside Antenna or
Wall Antenna Outlet
1
1
Remove circular cable (RF cable) (surplus cable) plugged in "ANT.IN" Jack in rear panel of TV. Connect the cable
to "ANT.IN" jack in rear panel of DVD-Video.
2
2
Connect TV to DVD-Video. Connect "RF OUT" jack in DVD-Video with "ANT.IN" jack in TV with RF cable.
3
3
(If there is AUDIO/VIDEO INPUT jack in TV)
Connect VIDEO OUT jack in DVD-Video to VIDEO IN jack in TV, and AUDIO OUT jack in DVD-Video to
AUDIO IN jack in TV with connecting cable of Audio/Video jack.
Select VCR mode by pressing TV/INPUT button in TV, you can view more clear screen and sound than
connection with RF cable only.
• VHF: 2 ~13 channels of TV
• UHF: 14~69 channels of TV
• CATV: Broadcasting is transmitted with cable from broadcasting station by contract with the station and consumers. It does
not need any antenna.
• In/Out jack in Audio/Video terminal:
- In: A jack used to receive signal required in this unit from other units.
- Out: A jack used to send signal of this unit to other units.
• Connect with Audio/Video terminal, you can enjoy more clear video and audio.
(Use OUTPUT button in this REMOTE to select video mode.)
12
Rear Panel of DVD-VIDEO
ANT.IN
OUT IN
R
AUDIO
L
RF OUT
VIDEO
RF CABLE
Rear Panel of TV
INPUT 1 INPUT 2
ANT IN
AUDIO/VIDEO CABLE