Makita JV102D Instruction Manual page 9

OPERATION
CAUTION:
CAUTION:
breakage.
1
1. Cutting line 2. Base
tool forward along the previously marked cutting line.
CAUTION:
With the base tilted, you can make bevel cuts at any
Loosen the bolt on the back of the base with the hex
wrench. Move the base so that the bolt is positioned in
the center of the cross-shaped slot in the base.
Forcing the tool may
2
1. Hex wrench 2. Bolt
the base.
1
1. Edge 2. Graduation
1. Hex wrench 2. Bolt
Loosen the bolt on the back of the base with the hex
tighten the bolt to secure the base.
9 ENGLISH
1
2
Base
2
1
2
3
Base
3