Removing And Replacing The Access Panel - HP Elite Slice Hardware Reference Manual

Removing and replacing the access panel

Removing the access panel
The Elite Slice access panel must be removed to access the hard drive and system memory modules.
1. Remove the Elite Slice from any additional modules.
For instructions, see
2. Place the computer upside down on a flat surface covered with a soft cloth to protect the computer from
scratches or other damage.
3. Loosen the four captive screws (1) securing the access panel, and lift the panel off the computer (2).
Replacing the access panel
1. Place the computer upside down on a flat surface covered with a soft cloth.
2. Align the access panel (1) with the computer so that the module connection port is clearly visible
through the opening in the access panel.
Removing modules on page 11.
Removing and replacing the access panel 17