Hardware Upgrades; Removing And Replacing The Top Access Panel - HP Compaq d530 USDT Hardware Reference Manual

Removing and Replacing the Top Access Panel

Å
Å
Ä
✎
Hardware Reference Guide
WARNING: To reduce the risk of personal injury from electrical shock
and/or hot surfaces, be sure to disconnect the power cord from the wall
outlet, and allow the internal system components to cool before touching.
WARNING: To reduce the risk of electrical shock, fire, or damage to the
equipment, do not plug telecommunications or telephone connectors into
the network interface controller (NIC) receptacles.
CAUTION: Static electricity can damage the electronic components of
the computer or optional equipment. Before beginning these procedures,
ensure that you are discharged of static electricity by briefly touching a
grounded metal object. See
more information.
Access to the PCI card is through the bottom access panel. Refer to
"Adding a PCI Expansion Card"
To access system memory or the internal hard drive, you must remove
the top access panel:
1. Exit all software applications, shut down the operating system
software, turn off the computer and any external devices, then
disconnect the power cord from the power outlet.
www.hp.com

Hardware Upgrades

Appendix C, "Electrostatic Discharge"
for more information.
2
for
2–1