HP Elite Slice Hardware Reference Manual page 15

Hide thumbs Also See for Elite Slice:

Table of Contents

Disconnect the power cord from the Elite Slice and disconnect any external devices.

If the VESA plate is connected, slide the quick release latch to the unlocked position and remove the

VESA plate.

Align the module connection port on the underside of the Elite Slice with the module expansion

connector on another module and press the Elite Slice down firmly.

You should hear a quiet click when the modules lock together. Each module locks into place and hides

the release latch of the module above it.

Repeat until all modules have been connected.

Slide the quick release latch on the VESA plate (1) to the unlocked position. Position the connected

modules over the VESA plate.

The VESA plate does not have an module expansion connector. Be sure that the ports of Elite Slice and

the quick release latch and security cable slot of the VESA plate are all on the same side.

Press the modules (2) down onto the VESA plate.

Connecting or removing modules

Table of Contents

Show Quick Links

Table of Contents