Table of Contents
Advertisement
4.5.2.
Test Commands
Carrier Transmission Tests can also be simply realized with the WinB900 Software.
The "Carrier Test" option of the "Advanced Configuration" Menu allows to test Carrier
Transmission from a radio module.
When this option is selected, the software displays the following window:
• "Carrier Transmission" Selection
• "Radio Channel" Field
(Future software option – Not available at this time)
Through this window, it is possible to transmit several types of carrier to check the
power and the signal modulation. Here are the following Carrier's choices:
• Pure
• Modulated at '00'
• Modulated at '01'
• Modulated at '10'
• Modulated at '11'
Remark:
If a transmission is in progress and you want to change the carrier type, it is
imperative to stop the transmission before selecting another carrier, otherwise
your change will not take effect
This Field available for input specifies the radio channel where the selected carrier
will be transmitted from.
31
Advertisement
Table of Contents
