15
3.5.2. WinB900 Software Utilization in Point-to-Point Mode
The WinB900 Software can have two radio modules communicate between the COM1
and COM2 Port of a PC.
In a first phase, the two modems have to recognize each other ("Acquisition"). Go in
the "Quick Configuration" Menu, to the "Acquisition" Option. When this option is
selected, the software displays the following screen:
Select the table of the chosen channels as well as the No. of Personal network
(between 1 and 65535), and then launch the Acquisition clicking on the "Point-to-Point
Acquisition" button.
After clicking the button, the following message appears:
You can then quit the window. The Modems are synchronized (Green Led on).