Use Of The Winb900 Software In Network Mode - Adcon B900ss-20 Technical Manual

18

3.5.3. Use of the WinB900 Software in Network Mode

The operating principle is similar to the Point-to-Point Mode.
In a first phase, the two modems have to recognize each other ("Acquisition"). Go in
the "Quick Configuration" Menu, to the "Network Acquisition" option. When this
option is selected, the software displays the following screen:
It should be noticed that if the Modem already holds a Network Number and Clients,
these two pieces of information will display in the "Network No." and "Clients Count".
If the Network No. is modified, the Server will then lose all the Clients already acquired.
Acquisition can be launched by clicking on the "Acquisition" button. After this, the
following message is displayed:
You can then quit the window. The Modems are synchronized (Green Led (On).