Table of Contents
Advertisement
1
touch pad
•
To move the cursor, lightly slide your finger over the touch pad.
•
To select an object, lightly tap once on the surface of the touch pad or use
your thumb to press the left touch-pad button.
•
To select and move (or drag) an object, position the cursor on the object
and tap twice on the touch pad. On the second tap, leave your finger on
the touch pad and move the selected object by sliding your finger over the
surface.
•
To double-click an object, position the cursor on the object and tap twice
on the touch pad or use your thumb to press the left touch-pad button
twice.
You can also use the track stick to move the cursor. Press the track stick left,
right, up, or down to change the direction of the cursor on the display. Use the
track stick and track stick buttons as you would use a mouse.
Customizing the Touch Pad and Track Stick
You can use the Mouse Properties window to disable the touch pad and track
stick or adjust their settings.
1 Open the Control Panel, and then click Mouse. For information about the
Control Panel, see Windows Help and Support. To access Help and
Support, click Start
2 In the Mouse Properties window:
•
Click the Device Select tab to disable the touch pad and track stick.
•
Click the Touch Pad tab to adjust touch pad and track stick settings.
3 Click OK to save the settings and close the window.
Changing the Track Stick Cap
You can replace your track stick cap if it wears down from prolonged use or if
you prefer a different color. You can purchase additional caps by visiting the
Dell website at dell.com.
2
touch pad buttons
→ Help and Support.
Setting Up and Using Your Tablet-PC
79
Advertisement
Table of Contents
