Using A Master Clock - DCS Scarlatti DAC User Manual

dCS Scarlatti DAC User Manual

Using a Master Clock

The performance can be improved further by adding a Scarlatti Clock to the system as shown below.
AES 1
ANALOGUE OUTPUTS
LEFT
L
Balanced - or - Unbalanced
Analogue Outputs
To pre- or power amplifier inputs
Figure 3 – Using the Scarlatti Transport , DAC and Clock together
• Connect one of the Clock's
DAC.
• Use the Clock's
Frequency
• Use the DAC's
Sync
The system will re-lock and un-mute.
Please consult the Clock manual for more information on using a Master Clock.
The next step is crucial – sit back and enjoy the music.
Flename: Scarlatti DAC Manual v1_0x.doc
DIGITAL
CH1 SDIF
OUTPUTS
IN ---- WORDCLOCK --- OUT
AES 2 RCA BNC TOSLINK
WORDCLOCK OUTPUTS
1 2 3 4 5 6
LEFT
DIGITAL INPUTS
RIGHT AES 1 AES 2
RIGHT
R L R
Word Clock Outputs
button to set the outputs to 44.1kHz, to suit the CD Transport.
button to set the sync mode to WClk.
CH2 SUC
1394
REF. IN
7 8
RCA 1
CH 1 DSD/SDIF CH 2
TOSLINK
SPDIF
BNC
OUT
IN
RCA 2
WCLK
to the Word Clock
Page 11
Software Issue 1.0x
June 2008
Scarlatti Transport
Scarlatti Clock
~
50/60 Hz, 30W
1394
FUSE
SUC
T 500mA L
Scarlatti DAC
~
1394 50/60 Hz, 50W
FUSE
SUC
T 500mA L
Inputs of the Transport and
English version