Table of Contents
Advertisement
dCS Scarlatti DAC User Manual
DISPLAY SETTINGS
Set the display
Set the display
Runs a
Display Test
SIGNAL GENERATOR
Runs a
Channel Check
on the left channel only while the display shows Left, then the right channel only while
the display shows Right. If the these are the wrong way around, the left and right
channels are swapped somewhere in your system.
Runs a
Phase Check
phase on both channels while the display shows
noise on the right channel is inverted while the display shows
burst should produce a central image, the second burst should not. If these are the
wrong way around, one channel in your system is phase inverted. Press the
button to stop the test and return to the menu.
Runs a
Burn-In
Loud, then outputs modulated pink noise that ramps up slowly in level. Press the
← →
or
reasonable, as careless use can damage your amplifiers and loudspeakers. dCS will not
be liable for such damage.
Flename: Scarlatti DAC Manual v1_0x.doc
Menu
Brightness
to a comfortable level using the rotary control.
Contrast
to a comfortable level using the rotary control.
routine, which flashes all the indicators and the main display.
Menu
routine to test the system for swapped channels. A tone is output
routine to test the system for phase reversals. Noise is output in
procedure to condition your system. The unit displays
buttons to stop the procedure. Please ensure that the volume level is
In
Phase. Press the
Page 21
Software Issue 1.0x
June 2008
MENU
button, the
Out of
Phase. The first
←
→
or
Burn In Caution!
MENU
English version
Advertisement
Table of Contents
