Clock Functions - AEG BSE571221M User Manual

If you put too much water
into the tank, the safety
outlet moves the excess
water to the bottom of the
oven.
Remove the water with a
sponge or a cloth.
5.10 Emptying the water tank
CAUTION!
Make sure that the
appliance is cool before you
start to empty the water
tank.
1. Prepare the draining pipe (C),
included in the same package with
the user manual. Put the connector
(B) onto one of the ends of the
draining pipe.
2. Put the second end of the draining
pipe (C) into a container. Put it at a
lower position than the outlet valve
(A).

6. CLOCK FUNCTIONS

6.1 Clock functions table
Clock function
A
B
C
Application
TIME OF DAY To show or change the time of day. You can change the
time of day only when the appliance is off.
DURATION To set how long the appliance operates. Use only when
an oven function is set.
3. Open the oven door and put the
connector (B) into the outlet valve
(A).
4. Push the connector again and again
when you empty the water tank.
The water tank can have
some water when the
display shows
symbol. Wait until the
water flow from the
water outlet valve stops.
5. Remove the connector from the valve
when the water stops flowing.
Do not use the drained
water to fill the water tank
again.
ENGLISH 11