Setting Valve Sequence - Netafim nmc-pro User Manual

PROGRAM MENU

2.3.1 Setting Valve Sequence

The following section provides examples on how to set the valves' sequence.
Example 1: Cycling Irrigation Program for One Valve
In the following example, Irrigation Program 4 begins running at 8:00 AM. There are two cycles, with one hour in
between each cycle. Irrigation is from one valve. Run Time program 1 and Dosing Program 1 are used.
DATE : 19-Apr-07
IRRIGATION PROGRAM
Program: 4 Priority:
Start Time 08:00
Clock Start 2
Min. Time 01:00
Valve # 001
Run Time # 1
Dosing Prog 1
Day: 01/01 1
Dose/Water D
Example 2: Cycling Irrigation Program for Group of Two Valves
In this example, two valves operate simultaneously (valves operating together is a called a group). All other
specifications are the same as those found in Example 1.

Note: Valves in the same group must have the same run time.
TIME : 16:12:32
Const. 0%
NMC-PRO
User Manual
Page 18