Clearance From Combustible Materials - Truma Combi eco Installation Instructions Manual

Clearance from combustible materials

Example not to scale.
i
Fig. 4b
Consult Fig. 4b for the clearance.
Clearance
f BACK (Duct Connection)
g * ) COMBUSTION AIR DUCT
h FRONT (circulation air inlet)
h** ) FRONT (circulation air inlet)
i LEFT SIDE / RIGHT SIDE
k TOP
– BOTTOM
– WARM AIR DUCT insulated
)
* Clearance along combustion air supply
tube
** ) Minimum distance, if gas connection is
not inside the installation compartment
g
TOP VIEW
i
FRONT VIEW
in. mm
1 25
1 25
4 100
2 50
0.5 12
2 50
0 0
0 0
Securing the furnace
Risk of explosion!
An improperly secured Combi furnace can be-
come dislodged in an RV accident and the gas
line can become disconnected.
• The floor or false floor must bear the load
of a secured furnace. Contact the Truma
Service Center on 1-855-558-7862 if you
are unsure whether the floor can bear the
load of the furnace.
• Use the supplied or equivalent screws
(Fig. 5 – 3).
• DO NOT use screws with a smaller core di-
ameter under any circumstances.
1. Screw both aluminum frame feet (Fig. 5 – 1)
to the floor or false floor.
2. Screw at least one plastic frame foot
(Fig. 5 – 2) to the floor or false floor.
1
Fig. 5
1 Aluminum frame feet
2 Plastic frame feet
3 Panhead self-tapping screws #12 x 1 in.
(5.5 x 25 mm) or equivalent screws (4 screws)
Top view
2
2
3
1
9