Water Installation - Truma Combi eco Installation Instructions Manual

Water installation

Please note: This drawing is not intended to describe a complete system. It is up to the licensed,
professional installer to determine the necessary components for and configuration of the system
being installed. This diagram does not imply compliance with state or local code requirements or
regulations. It is the licensed professional installer's responsibility to make sure that the installation
fully complies with all state or local code requirements or regulations.
10
Fig. 26
1 Adaptor 12 mm to 1/2 in. CTS tube
2 1/2 in. PEX x 1/2 in. NPT female threaded
adapter
3 1/2 in. CTS PEX tube
4 T-piece 1/2 in. CTS PEX tube (not included)
5 Truma water pressure regulator (optional)
6 Non-return valve (optional)
7 Truma pressure relief/drain valve (not included)
8 Cold water connection
Elbow fitting – push-fit 12 mm
10
Fig. 27 Illustration for installation with a bypass kit for winterizing
9 1 4
8 1 2 7
9 1 4 1
8 1 2 7
1 3 5
6 4 2
9 Hot water connection
Elbow fitting (with aeration valve) –
push-fit 12 mm
10 Venting hose, external diameter 11 mm
11 City water connection
12 Fresh water tank
13 Water pump
14 Water connection to the fresh water tank
15 Winterizing Kit (example, not in scope of
supply)
3 5
6 15 4 2
3 11 14
12
4 13
3 11 14
4 13 12
19