Printer Settings - Magicard ID Card Printer Driver Manual

Ultra Electronics Card Systems
SECTION 4.3
The "Printer Settings" tab enables the user to set the printing parameters e.g. Speed,
Temperature and Bend Remedy. The settings are shown in a user friendly manner
via the P.C for every printer connected to the SCSI bus.
So for example if two printers (XID 450's) were connected to the SCSI bus two tabs
would show at the top of the page:
Printer SCSI ID : 2
Printer SCSI ID : 3 etc.
Individual printers
attached to the
SCSI Bus.
Printer Settings –
see Section 8 for
descriptions
•
Load from File
•
Save to file
•
From Printer
•
To printer
•
Test Print
NOTE

PRINTER SETTINGS

Select a profile currently loaded on the computer
Save a profile to the computer.
Get current settings from the printer.
Send settings currently on the screen to the printer.
Produces an internal test card from the printer.
A PROFILE IS A FILE ON THE PC THAT CONTAINS SPECIFIC
PRINTER SETTINGS
25 Magicard Prima Driver Manual
Printer Setting
Transfers
(described
below).