Insert Sd Card; Mini Usb Cable; Upgrades: Micro Sd Card; Restart After Interruption In Use - Valley Electronics Lady-Comp Instructions Manual

11. Important notes:

Insert SD card

Notch to close the device
Mini USB connector
Serial port (for
servicing only)
SD card slot
Analysis of your fertility data – read out:
Log on to the website: www.lady­comp.de Register and create your account and then follow
the online instructions to upload your data via the mini USB cable.
If you have any questions about your cycle please don't hesitate to contact us.
Please send us an email: info@lady-comp.de or call us.

Mini USB cable

A mini USB cable is included with your Lady­
Comp. Use the mini USB cable to upload your
data to your computer. You, as well as your dis­
tributor or Valley Electronics GmbH, can analyze
and evaluate your cycle data. This can be done
through our web portal or via email.
Temperature sensor
connection port

Upgrades: Micro SD card

If you wish to get a software update and/or an
upgrade for more functions at a later date, we will
send you an SD card.
Battery compartment
– Open the unit as described on page 6
and serial number
– Remove batteries
– Insert the SD card
– After successful completion of updates/
upgrades, we recommend that you remove the
SD card again to avoid unnecessary power
consumption.
AAA Charger
The corresponding battery charger can be ordered
from us. Insert 2 AAA batteries into the charger.
The charging status is displayed on the charger.
36
Loss of data Program
There is no risk of losing your data, even if the The program is based on all natural family planning
batteries are depleted. research data. It contains a database of more then
1 million cycles and uses biomathematical forecast­
After the pill
ing calculations as well as the very latest computer
(or hormonal contraception)
techniques. The more regularly you measure, the
Prior to starting Lady-Comp, you must stop taking faster the device gets to know and interpret your
any form of hormonal contraception. The first individual cycle. It will show more and more green
bleeding after stopping hormonal contraception days (infertile) and the red days will decrease
is not a menstruation, but a hormone­conditioned (fertile days) as the device learns your individual
withdrawal bleeding. Do not enter "M" for this rhythm. Depending on your individual cycle pattern
bleeding. you will have between 7 and 12 red days per cycle.
Pearl-Index Prognosis
The Pearl Index is the value by which the safety Our displays in relation to ovulation and planning
of a contraceptive method is specified in medi­ are calculated prognoses. Once a menstrual cycle
cine. The daily fertility displays of Lady-Comp is completed and a new one begins with menstru­
ation, Lady-Comp will confirm day of ovulation
have a Pearl Index of 0.7 or to explain it more
easy of 99.3%. retrospectively. The confirmed ovulation day will
be recognized after the 4th cycle day of your next
Example:
menstrual cycle.
If 100 women use contraception for one year and
Travel and time zones
one of them becomes pregnant, this corresponds
to a Pearl Index of 1.0. When travelling in different time zones you have
the ability to change the date and time to the
local time. Set and activate the alarm to the desired
new reading time. Lady-Comp will be ready to
take your measurement the next morning. Repeat
the procedure when you return home.
Summer and winter time
Set the time forward or backward in summer or
in winter, as described on page 9.
Shift work
Set and activate the alarm to the desired new
reading time. Let the alarm tone wake you up the
next morning and take your measurement as
usual. Proceed likewise at the next shift change.

Restart after interruption in use

The time, date, and year continues to work auto­
matically. The measurement period is disabled
when you don't take your temperature and needs
to be reset by activating the alarm clock. You do
this by setting the alarm for the next morning
(before midnight) continue as usual.
37