Deleting Data; Temperature Self Test; Sample Values - Valley Electronics Lady-Comp Instructions Manual

Deleting data

"Return" illuminated
Confirm by pressing
Cancel Press key
"OK" 10 times to
"Return" "Return"
completely delete data.
32
To delete all your personal data and measurements press the "OK"
button in the delete menu 10x in a row. The indicator bar will decrease
step by step. If you press another key (left, right, up, down), the indicator
bar will revert back to the starting position and you have to press the
"OK" button 10x again in order to do the deletion process. After
deletion, the individual displays will only show the sample values like
a new device. After the first new temperature measurement, the sample
data will be automatically deleted.

Temperature self test

The thermometer starts Signal tone indicates
"Return" illuminated
to blink automatically end of measurement
Press key
Please measure
"Return"
The temperature self test can be conducted to see if the temperature
sensor is working properly. The self test can be canceled by pressing
and holding the "OK" key for 3 seconds.
Good to know:
Device information
Device information includes:
– The device serial number
(13547206)
– The software version
designated by the last
two numbers (­31)
– The battery display
– Brightness displayed
as a percent
"Return" illuminated
Press key If the device has an error
"Return"
or a warning, this will be
displayed. For a list of
possible errors see page 38.
33