Fertility And Planning Statistics - Valley Electronics Lady-Comp Instructions Manual

9. Fertility and planning statistics

Fertility statistics
Only for Lady-Comp and Lady-Comp baby
1. Cycle length 2. Temperature increase
Press key Browse statistics
With the fertility and planning statistics you have the opportunity to
retrieve important information about planning a child successfully. After
three cycles the computer has enough information to assist with your
family planning goals.
3. Ovulation range 4. Length of luteal phase
Browse statistics Browse statistics Browse statistics
22
1. Average cycle length 3. Ovulation range in days
The average length of your menstrual The ovulation fluctuation in days
cycle is shown. is shown.
2. Average temperature rise 4. Length of luteal phase
after ovulation
The average length of luteal phase
The average temperature rise after is shown.
ovulation is shown.
*
5. Monophase 6. CLI*
Browse statistics Browse statistics
5. Number of monophase cycles
The number of monophasic cycles are shown.
If no ovulation takes place during a cycle
it will be displayed. During that cycle the
fertility indicator will remain "red".
6. Number of cycles with CLI (CLI =
Corpus Luteum Insufficiency) *
A corpus luteum insufficiency (CLI) will be
detected by Lady-Comp baby. This is
detected by realizing that the length of the
high level after ovulation is too short or the
temperature increase is low. This information
is important for planning a child.
*
7. Planning hits *
Lady-Comp baby displays planning hits.
This is the number of times sexual inter­
course has corresponded with ovulation.
The number of hits over the last 20 cycles
is only shown when you activate "SI" Sexual
7. Planning hits*
Intercourse.
"Return" illuminated
Press key
"Return"
*Only for Lady-Comp baby
23